Pre-order OpenAMRobot 2.0.
An open-source mobile robot and dual-arm manipulator you can build, study and change. DIY kits or assembled in Berlin. First dispatch April 2027.
Founder price now: 30% off until 15 November. 25% to 30 November, 20% in December.
April 2027
In order of payment.
Locked when you pay
Full payment at order, no surprises later.
10 + 5
Up to 10 DIY base kits and 5 dual-arm robots.
Everything published
MIT, CERN-OHL-P-2.0, CC BY 4.0.
Five ways to start.
Pay in full through Stripe. Prices excl. VAT, battery and delivery.
Mobile Platform
DIY Mobile Platform kit
- The complete 2.0 base as a parts kit
- You assemble it with our step-by-step build guide
- Jetson Orin NX, RPLIDAR S3, Gemini 336L, STM32 controller
EUR 5,500
EUR 3,850
You save EUR 1,650excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitAssembled Mobile Platform
- The same base, assembled and bench-tested in Berlin
- Firmware flashed, ROS 2 stack installed
- Unpack, charge, start developing
EUR 7,000
EUR 4,900
You save EUR 2,100excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitDual-Arm Manipulator
DIY Dual-Arm Manipulator kit
- Base parts kit plus DOLD lift and two OpenArm 2.0 arms
- You assemble the base and the upper body
- Shoulder height 1000 to 1350 mm
from EUR 12,800
from EUR 8,960
You save EUR 3,840excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitAssembled Dual-Arm Manipulator
- Base, lift and two OpenArm 2.0 arms with grippers
- Assembled and tested in Berlin
- MoveIt 2 configuration included
from EUR 14,800
from EUR 10,360
You save EUR 4,440excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitPremium Embodied AI Training Kit
- Assembled dual-arm robot with two OpenArm 2.0 arms
- OpenArm KER leader set for teleoperation and demonstration recording
- AI pipelines: datasets, imitation-learning training and evaluation, delivered as they are released
- Onboarding sessions for your team
from EUR 25,000
from EUR 17,500
You save EUR 7,500excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitEvery package includes a Daly charger for manual charging. Battery and delivery are not included. The robot is designed for the TZBOT WCM-500-24 wireless charger, which is not included. “From” prices are the standard configuration; options are quoted separately.
Price by date.
| EUR, excl. VAT | List | 30% off, to 15 Nov (now) | 25% off, 16 to 30 Nov | 20% off, 1 to 31 Dec |
|---|---|---|---|---|
| DIY Mobile Platform kit | 5,500 | 3,850 | 4,125 | 4,400 |
| Assembled Mobile Platform | 7,000 | 4,900 | 5,250 | 5,600 |
| DIY Dual-Arm Manipulator kit | from 12,800 | from 8,960 | from 9,600 | from 10,240 |
| Assembled Dual-Arm Manipulator | from 14,800 | from 10,360 | from 11,100 | from 11,840 |
| Premium Embodied AI Training Kit | from 25,000 | from 17,500 | from 18,750 | from 20,000 |
Berlin time. List prices apply from 1 January 2027.
From payment to your lab.
Choose and pay
Pick your robot and pay in full through Stripe by card or bank transfer. Your price is locked.
Order confirmation
Within one working day Alex Reznichenko, our founder, emails your order number, VAT invoice and a short configuration form.
Monthly report
On the first Monday of every month you get a report on parts, builds and software.
Onboarding and dispatch
A 45-minute onboarding call, then dispatch from April 2027. Email support for 3 months.
Where the project stands.
We publish everything, including what is still in development.
Runs on our base robot
Release v0.0.1 (July 2026): ROS 2 Jazzy, Nav2 navigation, mapping and the browser operator UI.
v2.0.0-rc.1
The 2.0 design, software and manufacturing package, shown in simulation.
v2.0.0
Final release after physical integration and testing in Berlin.
Dual-arm and learning
Dual-arm control and the teach-by-demonstration pipeline, delivered progressively.
What is in the box.
- Mobile Platform: produced chassis parts; 2 ZLTECH brake hub motors and CAN driver; Jetson Orin NX 16 GB on carrier; STM32H723 base controller; RPLIDAR S3; Orbbec Gemini 336L; 4 ultrasonic and 2 time-of-flight sensors; IMU; two E-stops, reset button, contactors and fuses; wiring set; Daly charger; build guide and release files.
- Assembled versions add: assembly, wiring, firmware flashing, software installation and a bench test in Berlin.
- Dual-Arm Manipulator adds: DOLD Hexalift V4 lift, two OpenArm 2.0 arms with grippers, head camera, upper-body mounting parts, MoveIt 2 configuration.
- Premium kit adds: OpenArm KER leader set, AI pipelines for demonstration learning, onboarding sessions.
- Not included: battery (sourced locally from our parts list), delivery, TZBOT WCM-500-24 wireless charger.
Pre-orders build it.
The first batch can produce up to 10 DIY Mobile Platform kits and up to 5 dual-arm robots. Your pre-order pays for the parts of your robot: we order them as orders come in and report every month what has arrived, what is built and what is next.
Questions.
DIY kit or assembled?
A DIY kit needs mechanical and electrical skills: crimping, battery handling and flashing firmware. Plan two to four working days for a first base, more for the dual-arm robot. If that is not your team, choose an assembled version.
What exactly ships?
The package you choose, in the v2.0.0 configuration current at dispatch. If a part becomes unavailable we replace it with an equivalent and say so in the monthly report.
Is the battery included? How does charging work?
The battery is not included: lithium packs are dangerous goods in transport, so you buy the specified 8S LiFePO4 pack (EVE LF105, 25.6 V 105 Ah, Daly BMS) locally from our parts list. Every package includes a Daly charger for manual charging. The robot is designed for the TZBOT WCM-500-24 wireless charger, which is not included.
Delivery?
Worldwide, at the buyer’s cost. We quote the freight before dispatch and invoice it separately.
VAT?
Prices exclude VAT. EU businesses with a valid VAT number pay no VAT (reverse charge). EU consumers pay their country’s VAT. Outside the EU, import duties and taxes are paid by the buyer.
Can I get a refund?
Yes: in full within 14 days of payment; after that, minus parts already bought for your order; and in full if dispatch has not started by 30 June 2027.
Support and software updates?
An onboarding call and 3 months of email support are included. All OpenAMRobot software is open source, and every new release runs on the robot you buy.
How do I pay? We need an invoice first.
Full payment at order by card or bank transfer through Stripe. Labs and universities that need an invoice or quote first: use the form below or write to info@botshare.ai.
Pre-order OpenAMRobot 2.0.
An open-source mobile robot and dual-arm manipulator you can build, study and change. DIY kits or assembled in Berlin. First dispatch April 2027.
Founder price now: 30% off until 15 November. 25% to 30 November, 20% in December.
April 2027
In order of payment.
Locked when you pay
Full payment at order, no surprises later.
10 + 5
Up to 10 DIY base kits and 5 dual-arm robots.
Everything published
MIT, CERN-OHL-P-2.0, CC BY 4.0.
Five ways to start.
Pay in full through Stripe. Prices excl. VAT, battery and delivery.
Mobile Platform
DIY Mobile Platform kit
- The complete 2.0 base as a parts kit
- You assemble it with our step-by-step build guide
- Jetson Orin NX, RPLIDAR S3, Gemini 336L, STM32 controller
EUR 5,500
EUR 3,850
You save EUR 1,650excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitAssembled Mobile Platform
- The same base, assembled and bench-tested in Berlin
- Firmware flashed, ROS 2 stack installed
- Unpack, charge, start developing
EUR 7,000
EUR 4,900
You save EUR 2,100excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitDual-Arm Manipulator
DIY Dual-Arm Manipulator kit
- Base parts kit plus DOLD lift and two OpenArm 2.0 arms
- You assemble the base and the upper body
- Shoulder height 1000 to 1350 mm
from EUR 12,800
from EUR 8,960
You save EUR 3,840excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitAssembled Dual-Arm Manipulator
- Base, lift and two OpenArm 2.0 arms with grippers
- Assembled and tested in Berlin
- MoveIt 2 configuration included
from EUR 14,800
from EUR 10,360
You save EUR 4,440excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitPremium Embodied AI Training Kit
- Assembled dual-arm robot with two OpenArm 2.0 arms
- OpenArm KER leader set for teleoperation and demonstration recording
- AI pipelines: datasets, imitation-learning training and evaluation, delivered as they are released
- Onboarding sessions for your team
from EUR 25,000
from EUR 17,500
You save EUR 7,500excl. VAT, paid in full, price locked
Pre-order nowAsk about this kitEvery package includes a Daly charger for manual charging. Battery and delivery are not included. The robot is designed for the TZBOT WCM-500-24 wireless charger, which is not included. “From” prices are the standard configuration; options are quoted separately.
Price by date.
| EUR, excl. VAT | List | 30% off, to 15 Nov (now) | 25% off, 16 to 30 Nov | 20% off, 1 to 31 Dec |
|---|---|---|---|---|
| DIY Mobile Platform kit | 5,500 | 3,850 | 4,125 | 4,400 |
| Assembled Mobile Platform | 7,000 | 4,900 | 5,250 | 5,600 |
| DIY Dual-Arm Manipulator kit | from 12,800 | from 8,960 | from 9,600 | from 10,240 |
| Assembled Dual-Arm Manipulator | from 14,800 | from 10,360 | from 11,100 | from 11,840 |
| Premium Embodied AI Training Kit | from 25,000 | from 17,500 | from 18,750 | from 20,000 |
Berlin time. List prices apply from 1 January 2027.
From payment to your lab.
Choose and pay
Pick your robot and pay in full through Stripe by card or bank transfer. Your price is locked.
Order confirmation
Within one working day Alex Reznichenko, our founder, emails your order number, VAT invoice and a short configuration form.
Monthly report
On the first Monday of every month you get a report on parts, builds and software.
Onboarding and dispatch
A 45-minute onboarding call, then dispatch from April 2027. Email support for 3 months.
Where the project stands.
We publish everything, including what is still in development.
Runs on our base robot
Release v0.0.1 (July 2026): ROS 2 Jazzy, Nav2 navigation, mapping and the browser operator UI.
v2.0.0-rc.1
The 2.0 design, software and manufacturing package, shown in simulation.
v2.0.0
Final release after physical integration and testing in Berlin.
Dual-arm and learning
Dual-arm control and the teach-by-demonstration pipeline, delivered progressively.
What is in the box.
- Mobile Platform: produced chassis parts; 2 ZLTECH brake hub motors and CAN driver; Jetson Orin NX 16 GB on carrier; STM32H723 base controller; RPLIDAR S3; Orbbec Gemini 336L; 4 ultrasonic and 2 time-of-flight sensors; IMU; two E-stops, reset button, contactors and fuses; wiring set; Daly charger; build guide and release files.
- Assembled versions add: assembly, wiring, firmware flashing, software installation and a bench test in Berlin.
- Dual-Arm Manipulator adds: DOLD Hexalift V4 lift, two OpenArm 2.0 arms with grippers, head camera, upper-body mounting parts, MoveIt 2 configuration.
- Premium kit adds: OpenArm KER leader set, AI pipelines for demonstration learning, onboarding sessions.
- Not included: battery (sourced locally from our parts list), delivery, TZBOT WCM-500-24 wireless charger.
Pre-orders build it.
The first batch can produce up to 10 DIY Mobile Platform kits and up to 5 dual-arm robots. Your pre-order pays for the parts of your robot: we order them as orders come in and report every month what has arrived, what is built and what is next.
Questions.
DIY kit or assembled?
A DIY kit needs mechanical and electrical skills: crimping, battery handling and flashing firmware. Plan two to four working days for a first base, more for the dual-arm robot. If that is not your team, choose an assembled version.
What exactly ships?
The package you choose, in the v2.0.0 configuration current at dispatch. If a part becomes unavailable we replace it with an equivalent and say so in the monthly report.
Is the battery included? How does charging work?
The battery is not included: lithium packs are dangerous goods in transport, so you buy the specified 8S LiFePO4 pack (EVE LF105, 25.6 V 105 Ah, Daly BMS) locally from our parts list. Every package includes a Daly charger for manual charging. The robot is designed for the TZBOT WCM-500-24 wireless charger, which is not included.
Delivery?
Worldwide, at the buyer’s cost. We quote the freight before dispatch and invoice it separately.
VAT?
Prices exclude VAT. EU businesses with a valid VAT number pay no VAT (reverse charge). EU consumers pay their country’s VAT. Outside the EU, import duties and taxes are paid by the buyer.
Can I get a refund?
Yes: in full within 14 days of payment; after that, minus parts already bought for your order; and in full if dispatch has not started by 30 June 2027.
Support and software updates?
An onboarding call and 3 months of email support are included. All OpenAMRobot software is open source, and every new release runs on the robot you buy.
How do I pay? We need an invoice first.
Full payment at order by card or bank transfer through Stripe. Labs and universities that need an invoice or quote first: use the form below or write to info@botshare.ai.
Talk to us before you buy.
A quote for your lab, a different configuration, an invoice before payment: write to us and Alex replies within one working day.